Home > Fish Flashers, Flasher Kits, Flasher Accessories >

Buzz Bomb Flasher DIY Kit with Trolling Weight
Buzz Bomb Fish Flasher


 
Alternative Views:


Price: $6.95

MAKO DIRECT
Buy Direct

Custom Field 2:
World Wide Shipping

Custom Field 2:
 



Three Buzz Bombs DIY Package

  
Add the Easy Wind Flasher Float

  

Qty:  
Description
 

Buzz Bomb Fish Flasher Do-It-Yourself Kit - includes Trolling Weight

My Buzz Bomb Flasher (do it yourself kit) is the hottest fish flasher system in the ocean.

Don’t buy a $15.00 box of wine just to get a silver bag!

My dive buddy from Baja, was buying “ wine boxes”, then, pouring out the wine, just to get the mylar bags. After adding the weight, they were costing him around $18.00 each.

So, he suggested I come up with a cheaper and better way to make them.

And here it is..

Bigger..Better..Costs a lot less!

Combined with the MAKO Spearguns Fish Flashers and our Throw Flashers, these Buzz Bomb Flashers make for a winning combination on any hunt.

Each kit makes one X-large size Buzz Bomb Flasher. Get multiple kits and chain several of them on a single line to attract even more fish.

This do it yourself kit includes everything you need to make a badass buzz bomb flasher.

Includes:

  • 1 piece 19 inches long x 13 inches wide flasher bag (makes 1 X-large flasher)
  • 1 piece of 300lb mono and 2 crimps for making loop ends
  • 1 double eyelet trolling weight 2 oz
  • 1 piece of 20mm latex tubing for underbody
  • 1 tie wrap for securing flasher material to latex tubing
Buzz Bomb Flasher DIY Kit

Buzz Bomb Flasher DIY Kit with trolling weight

Instructions for building your Buzz Bomb Fish Flasher

Tape the welded end of the bag to a piece of cardboard and cut 3/8” to ½” wide strips using a razor blade and a straight edge.

Leave at least 1 inch of material at the top uncut.

For a less precise method, a pair of scissors can be used.

buzz bomb fish flasher DIY step 1

Cut 3/8" - 1/2" wide strips using a razor blade or scissors

buzz bomb fish flasher DIY step 2

Notice 1” of material at top left uncut.

Next, feed your mono through the hole of the supplied piece of latex tubing and crimp loops on both ends, securing the 2 oz weight to one end.

buzz bomb fish flasher DIY step 3

Slip the mono through the tubing and create loops on both ends

Then, tape one side of the flasher skirt to the 20mm latex tubing and begin to wrap it around and around the piece of 20mm tubing and secure with the supplied tie wrap (or constrictor knot) when done.

Trim excess piece of tie wrap and you are done. Multiple Buzz Bombs can be placed on a single line for enhanced effect.

buzz bomb fish flasher DIY step 4

Wrap the flasher around the tubing

buzz bomb fish flasher DIY step 5

Use the Tie Wrap to secure the flasher to the tubing

Buzz Bomb Flasher DIY Kit

Completed Buzz Bomb Fish Flasher


Share your knowledge of this product with other customers... Be the first to write a review