Home > GoPro Cameras / Speargun Camera Brackets >

Camera Mounting System with Quick Release (for wood and hybrid spearguns)
Camera Mounting System for wood guns


 
Price: $32.95

MAKO DIRECT
Buy Direct

Custom Field 2:
World Wide Shipping

Custom Field 2:
 



Quick Release Arm Style

  
Recoil Stabilizer Option

  

Qty:  
Description
 

MAKO Spearguns Camera Mounting System with Quick Release for Wood and Hybrid Spearguns

THE ONLY SPEARGUN CAMERA BRACKET WITH A QUICK RELEASE SO YOU CAN VIDEO TAPE YOUR BUDDY WITHOUT POINTING YOUR GUN AT HIM.

Your buddy just lined up on _the_ shot of the dive trip. But your gopro is mounted to your loaded speargun. You know it's critically important to never point your speargun towards your buddy. And now theres no video of that amazing stone shot.

I've been in this exact situation and thats why I created my unique quick release feature that lets you remove the gopro from your gun to safely capture all the action. You'll never never miss the action and you'll never point your gun towards your dive buddy with the MAKO Spearguns GoPro camera mounting system.

The Quick Release lets you switch from “GUN MOUNTED” to “HANDHELD” then back to “GUN MOUNTED” in less than 5 seconds (NO TOOLS REQUIRED).

The MAKO posi-lock modular design ensures the camera is always put back on the gun in the exact same position every time (in seconds and without looking).

Eliminates having to constantly install screws and remove screws from your wood stock. Just leave the low profile mounting base plate in place when not using your camera.

Never point a loaded or unloaded gun at any body or anything you don’t intend to shoot. With the MAKO Spearguns Quick Release Camera Mounting System, you can video or photograph targeted species while in gun mount mode and also video or photograph non targeted species as well as dive buddies safely and easily in hand held mode.

Video: Installing the Camera Mounting System on a Wood Speargun

Installing the MAKO Spearguns Camera Mounting System is simple & quick.

image-divider

VIDEO: Switch from Gun Mount, to Hand Held
then back to Gun Mount in seconds

Mounting Block allows Camera Arm to be mounted to the left or right side of the speargun

  • Mounts on the left or right side of speargun
  • For use with GoPro cameras and non GoPro cameras that have a standard tripod mount.
  • Camera arm comes pre machined for “side mounting” on left or right side of speargun.
  • Kelp divers choose the "In-Line Arm" for effortless diving in kelp.
  • Camera can be mounted above or below the camera arm for complete flexibility and unobstructed views
  • Camera arm can be removed and re-installed in seconds to make videoing or photographing your buddy fast and easy and SAFE!!!
  • One container of marine grease is now included free of charge with each MAKO Spearguns Quick Release camera mounting system. Screws and threads must be well greased for easy removal
example side mount above

Side Arm Mount Above

image-divider Example Side Mount Below (forward facing)

Side Arm Mount Below

In-Line Arm for Kelp Divers

Diving in Kelp?

No problem.

Use the “in-line arm” so your camera does not get hung up on the kelp.

The In-Line arm tucks your GoPro right in line with the speargun barrel letting you glide effortlessly through the kelp.

camera mounting system inline wood speargun mount

Inline Wood Speargun Camera Mount

Includes everything listed here:

  • Low Profile Mounting Base Plate: This low profile base plate is mounted to your gun using the 3 supplied stainless steel screws. It has a machined “posi lock” channel to easily accept the camera arm which fastens using the ¼-20 control knob.
  • Camera arm: This camera arm comes pre machined but is also easily modified by bending, and cutting using regular household tools to make a custom mount for any wood or hybrid speargun. Choose Side Arm or In-Line Arm
  • 2 Control Knobs: One of the ¼-20 “control knob” fastens the “camera arm” to the “base plate”. Just a couple of turns releases the arm for quick removal and a couple of turns re-connects the arm for rapid re-installation. The other “Control Knob” fastens the camera to the GoPro Tripod Mount (due to clearance considerations, this control knob is replaced with a stainless steel screw in the in-line mount configuration.
  • Stainless Steel Screws: For mounting the “Low Profile Base Plate” to speargun stock.
  • Neoprene Washer: Ensures a tight fit.
  • Tripod Mount for GoPro: Connects the Arm to the GoPro housing.
  • Marine Grease: One container of marine grease is now included free of charge with each Mako Spearguns Quick Release camera mounting system. Screws and threads must be well greased for easy removal
wood speargun camera bracket in-line arm kit

In-Line Arm Camera Mount

image-divider example side mount top

Side Arm Camera Mount

Optional Recoil Stabilizer

  • Most spearguns with any power at all will have some recoil. The GoPro thumb screw housing clamp often can't be cranked down tight enough to prevent your GoPro from tilting tilting forward and down upon firing.
  • The optional Recoil Stabilizer solves that issue by installing the stabilizer at the housing mount and replacing the GoPro knob with our longer screw. Just tighten the screw and the HERO 3 housing is locked in place.
Side Mount Camera Arm (shown with Recoil Stabilizer)

Recoil Stabilizer installed on GoPro


Average Customer Review: 4.5 of 5 Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
 
Quick release needs improvement August 19, 2017
Reviewer: Austin Scott from North Ogden , UT United States  
In order for it to release it only leaves a couple threads on the screw that holds the mount to gun. My screw fell out on the first dive when I tried to film my buddy and the mount was useless the rest of the trip. In addition the thread on the screw is a different thread then other GoPro accessories so there was no replacing it in the moddle of the ocean.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome Go Pro Mount October 5, 2015
Reviewer: Kevin Mehaffey from Fort Lauderdale , FL United States  
Quality mount and got some great video with it! My only recommendation would be to be careful with the rubber grommet if you take off the camera from the mount to film a buddy, the grommet floats away since it's not attached. Other than that it's an awesome mount! Thanks for the fast shipping!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Exactly what I was looking for. August 31, 2015
Reviewer: Thomas King from Sarasota, FL United States  
Excellent product. Easy to install, worked flawlessly. Definitely recommend the extra piece to keep the camera from kicking when you take a shot.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Looks nothing but great.. 5 stars July 6, 2015
Reviewer: Hamad from SPRINGFIELD GARDENS, NY United States  
I've been using the mount since 2012 and it is absolutely amazing, very quick and easy to remove and put back into place. I have tried other kinds of mounts but this is by far the best one. Highly recomended.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great idea, works like a charm April 21, 2015
Reviewer: Steven Field from New Port Richey, FL United States  
Having tried many types of GoPro mounts for my speargun, this so far is the BEST one I've used.

Was this review helpful to you?

View All Customer Reviews