VIDEO: Switch from a Standard Pole Spear to a Roller Pole Spear



OK Guys, in this video Dano is going to switch from a Standard Pole Spear to a Roller Pole Spear.

After removing the standard butt and band, take this corded end of the roller band and come over like this and form a loop and slide it onto the pole spear.

Then go ahead and install the pole spear roller butt.

Now secure the band with pre tension by pulling on the band until it locks in place on the front end of the connector.

Notice Dano has already installed a retaining loop for the optional pole spear resting hook.

Installation complete. It's that easy.